RD-Elastodeck Single-component liquid waterproofing system for roofs, decks and balconies.
Single-component liquid waterproofing system for roofs, decks and balconies.
One-component water-based elastomeric floor coating simultaneously providing very high abrasion resistance and a waterproof membrane.
Single-component waterproof elastomeric coating, intended for use as the wear coat for pedestrian and vehicular bearing applications on parking decks, walkways, mechanical rooms, stadiums and arenas, balconies, plaza and rooftop decks.
RD-Edeck Slurry is based on a mixture of water-based emulsion with quartz aggregates producing a textured, non-skid and high wear resistant layer for horizontal surfaces subject to traffic that will protect the surface. Thanks to its permanent flexibility and elasticity, RD-Edeck Slurry can absorb impact and abrasion without cracking, and can bridge small cracks in the surface. It can also hide small imperfections on the surface as it can be applied up to approximatively 0,8 mm / 35mils thick in one single coat.
RD-Edeck Slurry can also be used in combination with RD-Elastodeck fully reinforced waterproofing membrane in areas subject to wear and abrasion.
RD-Edeck Slurry is single package and has no pot-life which gives more comfort and time to the applicator to apply it, resulting in a more qualitative work and less waste. The system can bridge cracks and can recreate a smooth and even surface on damaged or light irregular floors. It is a system which is simple to use for both small and large size projects or spot repairs and does not need investment in expensive tools to apply it.
RD-Edeck Slurry is water-based, easy to handle, safe and has no fire risks. It is a fast-drying coating system that greatly reduces downtime during installation. Virtually odor free, it does not affect neighbouring occupants and can therefore be used in occupied buildings.
RD-Edeck Slurry does not necessarily need to be overcoated in outdoor applications. However, its rough profile may attract dirt and stains and it is therefore recommended to apply a finish coat of RD-Hydrograff HP or RD-Monofloor PU to help maintain a cleaner surface.
Can be applied to a wide variety of surfaces including concrete, cement, wood panels, …
Surfaces subject to heavy wear: warehouses, parks Decks, busy passage… | Wet film thickness in microns / mils | Dry film thickness in microns / mils | Consumption per m² / ft² per gallon | Comments | |
Primer | RD-Elastodeck (or RD-Unifix) | 90 / 3,6 | 50 / 2 | 0,11 Kg / 445 | Max 25% dilution depending on porosity and smoothness |
Intermediate | RD-Edeck Slurry | 900-1200 / 36-48 | 580-770 / 22-31 | 1,5-2Kg / 44-33 | 1 coat |
900-1200 / 36-48 | 580-770 / 22-31 | 1,5-2Kg / 44-33 | Optional 2nd coat | ||
Optional: Broadcast sand slightly or until rejection to strengthen the surface or for extra anti-skid properties. | |||||
Finish | RD-Hydrograff HP (*) | 105 / 4 | 50 / 2 | 0,10 L / 390 | 1 or 2 coats |
(*) Other options are possible: RD-Monovar PU or RD-Monofloor PU. Contact your RD Coatings representative for more information. |
Surfaces subject to light to moderate wear: balconies, decks, foot passage… | Wet film thickness in microns / mils | Dry film thickness in microns / mils | Consumption per m² / ft² per gallon | Comments | |
Primer | RD-Elastodeck (or RD-Unifix) | 90 / 3,6 | 50 / 2 | 0,11 Kg / 445 | Max 25% dilution depending on porosity and smoothness |
Intermediate | RD-Edeck Slurry | 600-900 / 24-36 | 390-580 / 15-22 | 1 – 1,5 Kg / 66-44 | 1 coat |
Optional: Broadcast sand on the wet surface slightly or until rejection to strengthen the surface, or for extra anti-skid properties. | |||||
Finish | RD-Monofloor PU (*) | 200 / 8 | 85 / 3,4 | 0,20 L / 200 | 1 coat |
(*) Other options are possible: RD-Monovar PU or RD-Hydrograff HP. Contact your RD Coatings representative for more information. |
The system can be top coated by one or two coats of RD-Hydrograff HP Clear High Gloss.
In case of exterior concrete decks, containment basins or storage areas requiring waterproofing to achieve both containment and wear resistant properties, RD-Edeck Slurry is used in combination with RD-Elastodeck fully reinforced waterproofing systems and can be applied directly on top of the waterproofing layer without the use of a primer.
Check the TDS of RD-Elastodeck for more information. Indicated consumption is theoretical and does not consider potential waste during application. It can also be influenced by the porosity and roughness of the substrate.
Ambient temperature: minimum 10°C (50°F) – Optimal between 12 and 28°C (54 and 82°F).
Relative humidity: maximum 90% with no threat of rain for 12 hours.
The concrete surface may not contain more than 4% relative humidity.
Brush, roller, notch squeegee, or metal trowel.
RD-Edeck Slurry can also be spray-applied using the Graco TexSpray T-max 6912 (large jobs),TexSpray RTX 5000PI (medium jobs) or TexSpray FastFinish (small jobs). Using these kinds of equipment allows greater productivity and a nicer finish.
The surface must be clean, dust-free and dry.
In case of mosses on the surface, remove it with a special anti-moss product.
Repair small cracks using RD-ACRYL W.
Use RD-CEMENT FILLER to perform concrete repairs.
Product is ready-for-use. Stir mechanically for 3 to 5 minutes before use.
Touch dry: +/- 3-4 hours
Recoatable:
+/- 18 hours at 15°C – 60°F
+/- 12 hours at 26°C – 80°F
+/- 4 hours at 35°C – 90°F
Total thickness and ventilation can greatly influence drying time.
Water
Mat
Grey, +/- RAL7005. Other colours are possible on demand.
1.7 +/- 0.05 g/cm³
In weight: 79% +/-2
In volume: 65% +/-2
150 - 200 P (Brookfield 20RPM)
< 7 g/L
Not flammable
24 months, keep away from frost and store away from heat.
Title | Norm | Results |
Red List Compliance | Living Building Challenge v3 | Pass |
VOC emissions | California Department of Public Health CDPH/EHLB/Standard Method version 1.2, 2017 | Pass |
VOC emissions | ISO 16000-6 / VOC classification used in France | A+ |
TVOC Concentration | USGBC’s LEED v4 rating systems | Pass |
Waterproofing | Karsten pipes | Class II |
Abrasion resistance Taber | ASTM D4060 | 66,5 mg CS10 wheel |
Flexion resistance | ISO 1519 / cylindrical mandrel 5 mm | Pass |
Flexion resistance | ISO 6860 / conical mandrel | Pass |
Information related to hygiene and to safety can be found in the Safety Data Sheet available on request.
These specifications are given for information. Since the manufacturer is not able to check the application of the products, he cannot accept any responsibility for it. This technical data sheet replaces all previous editions.
Contact your RD Coatings representative for more information.
Single-component liquid waterproofing system for roofs, decks and balconies.
Highly resistant satin coating specially formulated for the long-term protection of surfaces...
One-component water-based elastomeric floor coating simultaneously providing very high abrasion resistance and a waterproof membrane.